The Mégane II Owners' Club

A second hand sensor from ebay, glued in place almost worked . ABS fault would register at 15mph Turns out they are super sensitive to positioning, i had placed it too close to the centre, Repositioned it today and after several hours of waiting for the glue to set - it seems to be behaving correctl...

10 miles it would seem

turns out you cant get without buying a a new axel !
So i manufactured a plastic plate and with some superstrong glue
fingers crossed , light went out - lets see how long it lasts

*like an episode of scrap-heap challenge *

Annoying abs light been on for a while , however now the MOT is looming i thought it was time to investigate. Turns out the rear ABS sensor was loose , problem is that the ABS mount has disintegrated so nothing to plug it into ! When you rest it against the ring and start it up the abs system is ok ...

Took mine out in the autumn , easy job for RHD , surprised how clogged up it was with leaves , easy to refit as above it bends round.

Changed my oil and filter just yesterday , used an 8mm drain plug key to attach to my wrench
Bought from amazon for something like 3 quid ...

Fantastic reply thank you,

Can anyone tell me , how difficult a job is replacing front drop links
Fairly cheap to buy , but is it as easy as it appears unbolting and replacing ?
Any watch outs? Or should I just leave it alone...!

Ive done many diy jobs on my meggie but never on suspension parts.

1.5dci 53plate

wow ok, think ill wait till it breaks or falls off

How easy is it to sort a loose gear selector?
Its just worn out (100000+ miles)
No problem selecting gears just a little loose and doesnt feel very positive,

Hi now ive fixed the steering lock its time to move on to the brakes Ive changed many pads n discs in the past so no problem with the mechanics. When looking to order there seems to be different types of pads ... Some places dont specify , others talk about teves braking systems from '05 onwards Jus...

Success !! Fixed the lock today, saved myself a few quid. Basically removed the lock and looking down the hole where the locking bolt goes in there is a lip on the actual bolt mechanism, with a pencil file i removed a small part of it (took ages) allowing the mech to travel a little bit further.. Pu...

I can get a recon unit from ebay for about £90 , im just afraid that it might be he same.
Im not afraid of a bit of diy if I can make it travel further then thats what I will do
I will not be beaten !

53 plate 1.5dci megane 2 , forgot to mention

Hi im sure this has cropped up before , can anyone help Car is due MOT in 6 weeks time and i have what appears to be a common steering lock fault Car starts no problem , lock mechanism makes the right noises, however when the lock engages after the key card is removed it does not catch on the column...