The Mégane II Owners' Club

Just swapped the pressure sensor & cars started.
thanx for the reply

Yet again another fault. My wife started the car & drove a few meters & the car cut out. Injection fault came up on the dash. Pushed the car home & connected clip to it. New fault, DF113 Sensor supply voltage below minimum. Im sure DF113 has always been there but with a different meaning...

hello all, does anyone know how loud a horn should be to pass the MOT? my car just failed on the horn not being loud enough. i have 3 meganes & they are all the same. ive had a read through some older threads & it seems renault horns in general are quiet. so is my only option to buy a a none...

my card was the same started when inserted but wudnt work handsfree.
sent it off to a guy on ebay & he fixed it

i have an 03 megane 1.5 dci & i cant get any adjustment .

ive found what i think is the adjuster but nothings happening.
i wound it all one way then the other but no adjustment.

i fitted another headlamp i had spare & thats the same wind it in & nothing.

am i missing something?

i changed mine on my 2003 1.5 dci in a lot less than 3 hours, pretty easy job.
it is on passenger side

i changed that as well

thanx for all the reply's.
finally sorted the brakes today by changing the brake servo.
its a good job i keep a spare megane around for parts.

hello most likely bent a valve or 2

Yep thats pretty much what i was thinking.
was going to change the servo next, hoping that its the same as the 1.9 as i have a spare 1.9 for parts

the vac pump is creating a vacuum.
does the switch on the clutch pedal do anything besides letting you start the car?

ok today changed the front disc's & pads (needed doing) bled all the old fluid out from the lines (front & back)

checked pedals etc cant see anything not working or interfering with anything else.

cant see anything wrong or interfering with vac pipe.

brakes exactly the same.

When I say it doesn't stop I mean it takes ages instead of seconds

when the engine is not running you press the pedal the pedal goes hard but the car doesnt stop. when driving the brakes are normal & work 100% if i dont touch the clutch. but if the clutch is in before i touch the brakes then the pedal push's down goes hard but the car keeps rolling , just like ...

i thought lack of vacuum as the vac system has been stripped during rebuild & the brakes are dodgy when u press clutch & the engine revs drop off. the pedal is exactly like a car without the engine running, you press it & the car doesnt stop, just goes hard. cnt remember which dot fluid ...