How do I change my headlamp bulbs?
Posted: Tue Dec 25, 2007 7:14 pm
After you've got your arm in the wheel arch port and removed the plastic cover...
Remove the power connection to the bulb, on the top right of the bulb, push the top of spring upwards and then slightly to the right, it will fall down, remove bulb, replace bulb, fold spring back up and push so that it locks again and, finally, replace connector!
FYI: There are TWO types of bulb fitting.If you have no spring then the bulbs need to be rotated 1/4 turn anti clockwise to release...
Remove the power connection to the bulb, on the top right of the bulb, push the top of spring upwards and then slightly to the right, it will fall down, remove bulb, replace bulb, fold spring back up and push so that it locks again and, finally, replace connector!
FYI: There are TWO types of bulb fitting.If you have no spring then the bulbs need to be rotated 1/4 turn anti clockwise to release...