Megane GT220 clutch position sensor DTC

The section for all Megane III talk.

Moderators: q292u, Ray, AndyAdmin, Stranger

crazyazz
Posts: 1
Joined: Tue Jun 13, 2017 11:50 pm

Megane GT220 clutch position sensor DTC

Postby crazyazz » Tue Jun 13, 2017 11:54 pm

Hi guys,

Replaced the battery in the GT220 , now the following code comes up. Other code cleared ok but the clutch position sensor error. Only appeared after the battery was changed. Any ideas?

Thanks

Image

candleman
Learner Driver
Posts: 54
Joined: Tue Jun 24, 2008 2:14 pm
Currently Drives:: Megane3 Sports Tourer 1.5dci 110 Expression+
Location: Enfield, Middlesex

Re: Megane GT220 clutch position sensor DTC

Postby candleman » Thu Jun 15, 2017 8:58 am

Do you have stop/start and do you use it? If its been disabled then you might not realise the switch on the clutch pedal is faulty or a wire has broken. That's where I would look first. Sometimes a high resistance in the circuit can also throw a fault, so disconnect the connectors to the switch and reconnect a few times to clean them up a bit and see what happens. Its worked for me on other DTC sensor faults related to switches.

Candleman
How many more times, it's not an estate it's a SPORTS TOURER
Azzuro Blue 1.5dci 110 Expression+ Sports Tourer


Return to “Megane III”

Who is online

Users browsing this forum: No registered users and 9 guests