Hi I have a rain sensor fault and auto-light fault on my dash every time I try to use those functions. I am almost certain it is because when Auto Glass changed my windscreen they did not put a new clear gel in.
What I really want to know is, how to put the new gel in the sensor? I have removed the grey housing unit, but then I see the black sensor device with a silver metal clip on it and the black cable going in.
How do I remove and put back with out damaging anything? does it use a glue? suction?
HOW DO I CHANGE MY RAIN SENSOR? OR GEL?
Moderators: q292u, Ray, AndyAdmin, Stranger
-
- Rally Driver
- Posts: 1118
- Joined: Thu Oct 18, 2012 6:08 pm
- Currently Drives:: Megane convertible 1.9dci 2006
Re: HOW DO I CHANGE MY RAIN SENSOR? OR GEL?
When I had my screen replaced the gell was poured in to the housing and left to set while the screen was out , the housing was then attached to the screen , the fitter had a jig that held the housing level while the gell set
Return to “Pre Ownership Questions”
Who is online
Users browsing this forum: No registered users and 1 guest