Search found 33 matches

by mave17ick
Wed Mar 02, 2011 10:00 am
Forum: Problems / Questions
Topic: LAGUNA 3 08-Onwards Reliable ?
Replies: 0
Views: 1398

LAGUNA 3 08-Onwards Reliable ?

Anyone no anyone with one are they better thant the MEG 2 DOG AND LAG 2 DOG ??
by mave17ick
Tue Mar 01, 2011 12:35 pm
Forum: Problems / Questions
Topic: Engine Mount Dropped..!!
Replies: 3
Views: 2497

Re: Engine Mount Dropped..!!

Hi the mounts around £115-£120 any one can do it its an easy DIY job i did mine in 30 mins.
No one sell them after market either QH Did but the withdrew the mount for some reason.
by mave17ick
Fri Dec 17, 2010 12:31 pm
Forum: Problems / Questions
Topic: 3 beeps on start up
Replies: 8
Views: 9010

Re: 3 beeps on start up

by mave17ick
Mon Oct 25, 2010 2:26 pm
Forum: Problems / Questions
Topic: Engine vibration 1.9 diesel
Replies: 3
Views: 2940

Re: Engine vibration 1.9 diesel

Yer i had this it turned out the engine mount was at fault, on inspection it looked ok but had sank/collapsed when compared to a new mount.

Stick a pry bar and lift the mount slightly the vibration should stop in the cab till u take the pry bar out.
by mave17ick
Tue Oct 05, 2010 10:15 am
Forum: Problems / Questions
Topic: 1.9dci with a drinking problem
Replies: 1
Views: 1759

Re: 1.9dci with a drinking problem

Hi
Is this round town MPG ? as to be honest the mid 30s is all i get from my 1.9dci 120 round town take her on a run and she hits 55mpg odd.
by mave17ick
Mon Oct 04, 2010 3:32 pm
Forum: Problems / Questions
Topic: Lower Suspension Arm Pivot bolt Torque ?
Replies: 2
Views: 2340

Re: Lower Suspension Arm Pivot bolt Torque ?

Yer is that the Pivot bolt as well as dsent really mention that ?
by mave17ick
Mon Oct 04, 2010 1:21 pm
Forum: Problems / Questions
Topic: Lower Suspension Arm Pivot bolt Torque ?
Replies: 2
Views: 2340

Lower Suspension Arm Pivot bolt Torque ?

Hi all does anyone no what the torque spec is as NO INFO in th online manuals or Haynes ??

Or is it TFT setting ?

1.9 dci model
by mave17ick
Tue Sep 28, 2010 9:51 pm
Forum: Problems / Questions
Topic: Knocking from Front
Replies: 10
Views: 5103

Re: Knocking from Front

I had this issue mine was loose bolts on the universal joint for the steering rack re-placed and re torqued cured the problem also the ball joints are quite common to fail on renaults
by mave17ick
Mon Sep 27, 2010 12:04 pm
Forum: Problems / Questions
Topic: AIR CONDITIONING FAULT - MEGANE 1.9 DCI
Replies: 9
Views: 4925

Re: AIR CONDITIONING FAULT - MEGANE 1.9 DCI

Note to all The meganes Fuel injection computer knocks out the compressor when the pressure in the sytem gets below 3 bar to save any compressor damage. This the needs to be reset by renaults clip system once the system has been re gassed also the pressure switch is very unreliable and normally fail...
by mave17ick
Tue May 04, 2010 10:04 am
Forum: Parts and Accessories
Topic: Which OBDII Software Works with Elm327
Replies: 0
Views: 1470

Which OBDII Software Works with Elm327

Hi all Which OBDII Software Works with Elm327 on the megII 2005/55 1.9dci 120 to read and clear faults from the injection ecu ?
by mave17ick
Wed Apr 28, 2010 1:32 pm
Forum: Problems / Questions
Topic: Aircon dosent work
Replies: 4
Views: 3141

Re: Aircon dosent work

Well the guy in the post had Climate mines Old Skool Manual A/C also it has never done this before ??
by mave17ick
Tue Apr 27, 2010 7:46 am
Forum: Problems / Questions
Topic: Aircon dosent work
Replies: 4
Views: 3141

Re: Aircon dosent work

Yer its gassed and lubbed up good i really cant work it out :hm i have checked the manuals no mention of a temp switch i am at a loss big time :banghead
by mave17ick
Mon Apr 26, 2010 7:14 pm
Forum: Problems / Questions
Topic: Aircon dosent work
Replies: 4
Views: 3141

Aircon dosent work

Hi all Aircon dosent work unless engine coolant temprature is at 85 Degrees C anyone got any ideas ? it will not blow cold till the engine is at 85 also the :cry cooling fan is work with out any faults and engages when the call for aircon is requested but the compressor will not engage till the engi...
by mave17ick
Mon Apr 26, 2010 12:47 pm
Forum: Problems / Questions
Topic: Elm 327
Replies: 0
Views: 1207

Elm 327

Hi does anyone no if the elm 327 can reset a cold loop fault in the ECU well injection computer as some put it ?
as this is where the fault is stored

Does it re set all ECU faults i no it dosent deal with UCH faults.

Regards
by mave17ick
Wed Apr 21, 2010 9:08 pm
Forum: Problems / Questions
Topic: Aircon Pressure Switch Feeds
Replies: 1
Views: 1744

Aircon Pressure Switch Feeds

Hi does anyone no if it uses a positive or negative feed to swithc the compressor on or of depending on low or high pressure ??

Go to advanced search