The Mégane II Owners' Club

I put it into system there and it is coming up as same part but cheaper :

https://www.flickr.com/photos/34648770@N03/12569361003/

I must look at mine and see a part no, where about is it stamped ?

Cheers

I think it is the same pipe , nearly. 100% sure , is yours 82bhp ? I would say unfortunately that the seal is part of the pipe .

Yes it is no 4 on the drawing that I linked you to, it's known as AIR OUTLET MNFLD and it's part no is 82 00 166 828, you can get it here https://www.allcarpartsfast.co.uk/renault/renault-8200166828-pipe-air-intake/ same thing even though name is different, be interesting to see if it has the rubber...

Are you sure ? The gasket and the pipe in your photos are connected to the egr housing , look at this on eBay https://www.ebay.co.uk/itm/201011885635?redirect=mobile you can see the same gasket . That's where my leak is anyway.

I think this is yours:

https://www.flickr.com/photos/34648770@N03/12529390073/

sorry for quality but if you right click on the picture you can view it larger, the pipe (no 4) is what you and I have but as you can see there is no rubber gasket just a jubilee clip ( No 17).

Hi,

I need exactly the same thing for my 1.5dci, I don't suppose you got a part number for it cause I can't find it dialogys?

thanks

Hi folks, Currently fixing up a scenic I got on the cheap, I just completed the timing belt and water pump but because I had to disconnect the battery I have the famous 'CHECK PARKING BRAKE' message on the instrument panel along with the P (in a triangle) and service. The parking brake is working fi...

Hi, In most cases it is the module that is plugged into the motor that fails due to water ingress, you can send it away to be fixed or buy a modified unit which is watertight unfortunately with this one though you lose the one touch function you can get them here: https://www.ebay.co.uk/itm/RENAULT-...

The special tool's he is referring to is this https://ccw-tools.com/French-Locking-Tools/Sealey-VS820SA---Diesel-Engine-SettingLocking-Kit---RenaultNissan-1.5dCi--Suzuki-DDiS--Dacia-dCi---Belt-Drive/p-0-2455-2455-2455-2455-41338/ one pin locks the crankshaft at tdc and the other pin locks the camsha...

Alex

Got belt off and was able to turn the cams ever so slight by hand to get locking bar inserted. Check the link for pic.

https://www.flickr.com/photos/34648770@N03/11310766253/

So Crankshaft is up against locking pin and now the cams are locked @ TDC Hopefully. Can I move on ?

Adam

Problem is Alex I can't get the locking tool in, inlet dephaser cam won't line up at TDC . There is a tool that locks the sprockets in place in order to remove the sprocket bolts to make timing adjustments but I assume this has to be done with belt off? And how do you turn camshaft with bolt removed...

Hi, Ran into bother with the t/belt , it has been changed before but not by Renault dealer, problem is that when at tdc ( crankshaft up against timing pin ) the grooves at end of camshafts do not line up to place the alignment ruler onto, the left hand cam is ok but the right hand one is slightly ou...

Alex, I've a sneaky suspicion that they didn't change his coolant at all , the oil is fine no milky substance, it was just that brown sludge in coolant tank and everywhere else, what exactly is the brown sludge ? Oil and water? It was the Renault type d coolant that we tried to put in but only got 4...

Hi, Posting on behalf of my dads car, he almost ran out of coolant due to a leak which I traced to the plastic thermostat plate on flywheel side, however there was brown sludge everywhere, expansion tank, radiator pipes etc. I am certain it's not a head gasket. We flushed the system with a radiator ...

According to dialogys that part is listed as Plate-Ball Brg Ret part no. 8200188902, allcarpartsfast have it listed for a £2.57 and it's called a spacer I/drive.