The Mégane II Owners' Club

I won't need spacers at all I don't think if i buy these wheels!
Oh really so they will be a perfect fit for my arch's and sit flush? is there any room at all on the arch's?
I have my car on coilover's so it's lowered 70mm all over as well!

I think my original wheels are 6.5j but I could be wrong!
These wheels are 8j, so would be alot wider and would look better! What does everyone else think?

Okay so I was going to buy new alloys! Bbs rs's 18x8!
The ET is 35! Now I was wondering will this mean that if I buy these wheels they will stick out 7mm more than the usual et 42 OEM wheels? Thanks

Haha yes I do realise that!
That's what I want! I was going to buy adapters to make my wheels go from 4x100 to 5x112.3 so could fit nice alloys but I'm just going to buy spacers for now I think with my OEM wheels!
So will those spacers do?

Finally decided to buy wheel adapters for my Megane CC! :) Now only problem is the measurement's!! How thick are the bolt's in a 2004 Megane CC.....? The Hub's that I was going to buy are as follows: - 60.1 Bore -4x100 stud pattern -12mm x 1.5" thread! Will they fit....? Here's the link below b...

Thanks, I just wanted to know what the highest mark is because I don't want to over fill the car either like! :) I checked there again and on the dipstick there is obviously the ball at the very end, then 7 lines, the some kind of part number then one other line, then obviously the rest of the dipst...

Now in normal car's to check the oil you take the dipstick out, clean it and put it back in and then take it out to check the level of the oil! On the end of the dipstick there is normally a reading (high to low). I was checking the oil on my car today and i noticed that there isn't any High or Low ...

Now in normal car's to check the oil you take the dipstick out, clean it and put it back in and then take it out to check the level of the oil! On the end of the dipstick there is normally a reading (high to low). I was checking the oil on my car today and i noticed that there isn't any High or Low ...

Hiya, just wondering can u get Kahn RS-C style alloys in the Megane fitment?
I would like to get 18" 4*100 5 spoke Kahn replica alloys for my megane cc!
They would fill the arches nicely!

Its been a while since i posted on this forum. :) But so far my car has v-maxx coilovers fitted all around and is lowered 70mm as a result. :D I think it looks a lot better to be honest! I also have 8000k HID's fitted in the dips and fogs. :-) which also looks great ;-) Everything else on the car is...

Anybody any ideas so?

Looking great :) :D makes a huge difference! Where did u source the back bumper? And did the inserts come free with it?! :) I really want to get this bumper but I still never got around to getting it! Also, do the twin exhausts connect to the real exhaust? Because I have the 1.9 diesel version and I...

Would these fit my Megane if I got the right adaptors!? The adaptors are 20mm thick! Wheels are 19" and 9" wide! Offset on the wheels are 60! So with the adaptors the offset would be 40! What offset do meganes normally have? 40 or 45 right? Here's a link to the same kind of alloys I am loo...

Where would u get 40mm spacers? The biggest I think I saw was 35mm each side so 70mm altogether!
Quite expensive to buy the four of them!
Nearly better off trying to get replica 225 wheels with our stud pattern with a nice offset!
Hmmmmm....?
Decisions decisions

Does anyone have a guide for fitting coilovers??
I know a few people on this have done it but is there any links to help me do it thanks