Page 1 of 1
Identification of this loose wire
Posted: Thu Apr 24, 2014 8:52 pm
by Carbontype
Hi guys,
Wonder could you guys give me a hand and tell me what this wire is and what it is for? Where i have drawn the arrow it has actually disconnected - should i tape it or should i just get a replacement?
Re: Identification of this loose wire
Posted: Fri Apr 25, 2014 9:10 am
by AlexB
Your arrow is not pointing at a wire. Do you mean a green wire in the background?
Re: Identification of this loose wire
Posted: Fri Apr 25, 2014 2:59 pm
by Carbontype
Hi,
No sorry my bad, it is the black wire with the green writing on it, that wire that I've the red line around
Thanks again.
Re: Identification of this loose wire
Posted: Fri Apr 25, 2014 3:40 pm
by AlexB
It's a pipe, isn't it?..
Re: Identification of this loose wire
Posted: Fri Apr 25, 2014 7:13 pm
by Brenzo
Here is a better image.
The small red circle is where the 2 components are disconnecting.
What is the name of the pipe and its function.
Thanks
Re: Identification of this loose wire
Posted: Sat Apr 26, 2014 8:05 pm
by AlexB
This have something to do with crankcase ventilation, and it is different from my RS250. Please have a look in the manual MR364MEGANE1.pdf, page 738, section "Oil vapour rebreathing".