Need help on Fault Codes please

Discussions around the Mégane 225.

Moderators: q292u, Ray, AndyAdmin, Stranger

User avatar
dean-weston
Learner Driver
Posts: 91
Joined: Thu Sep 16, 2010 7:27 am
Currently Drives:: 54 Megane 2 - 1.6VVT
Location: Wakefield
Contact:

Need help on Fault Codes please

Postby dean-weston » Wed Aug 29, 2012 6:51 pm

Hi all, I have just plugged a friends new 225 - 2004 into my USB OBD Scan and it brought up 3 codes -

P0301 - Cylinder 1 Misfire Detected
P0325 - Knock Sensor 1 Circuit Malfunction (Bank 1 or Single Sensor)
P0313 - Misfire Detected with Low Fuel

Now I understand the misfire could be caused by a faulty Injector in cylinder 1 (common issue ? ) but im unsure as the knock sensor fault code - If anyone can offer up and advice on this or all 3 of the faults? I would be more than great-full

many thanks in advance, Dean & Chris

davelowe
Driving Legend
Posts: 3136
Joined: Thu May 10, 2007 3:40 pm

Re: Need help on Fault Codes please

Postby davelowe » Wed Aug 29, 2012 10:17 pm

Capture the raw data - you should be able to reset the mis-fire counter and watch it rise as the engine runs. I'm not sure exactly what kit you would need to do this, as I tend to use quite a few different things. The fuel trim ought to give you some clues. As for the knock sensor problem, this might well be a by-product...
Silver 08 plate 5dr 1.5dci Dynamique 106 Tech Run (re-mapped)

Red 03 plate 5dr 1.9 Dynamique dci120

Best advice for Megane owners: sell it before it bankrupts you!


Return to “Megane 225”

Who is online

Users browsing this forum: No registered users and 2 guests