Not sure where to put this topic post so trying here first...
I have changed my radio for a double din size one. All is good except I would like to sink it further down as it is not flush with the facia. The trouble is I have measured the depth of the new unit and is hitting the plastic behind the unit. What exactly is this and could I take some out with a dremel?
I have to go back about 20mm or so...
Behind radio?
Moderators: q292u, Ray, AndyAdmin, Stranger
Re: Behind radio?
From memory, the heater box is behind the radio. Not sure that I would cut into it...
Re: Behind radio?
Hmm... in that case I might try moving the whole facia forward a touch... that should do it
I have already shorted the gear stick a couple of inches because the screen folds down and touched it.
Aparently standard din sizes don't include depth...
I have already shorted the gear stick a couple of inches because the screen folds down and touched it.
Aparently standard din sizes don't include depth...
Return to “Problems / Questions”
Who is online
Users browsing this forum: No registered users and 85 guests