Im only changing the headlights so will be making them fit!
Straight away away can see the new ones are bigger.
They fit in places fine and bolts line up underneath them.
The angle of the top of the bumper is different.
What i done was use masking tape to tape from the tip of the corner down towards grill keeping angle same as new headlights.
It fits but just needs a slight bit more trimming for bumper to go back a little more and close up that front bonnet shut line.
phase2 projecter headlights upgrade
Moderators: q292u, Ray, AndyAdmin, Stranger
- MilosB
- Advanced Driver
- Posts: 257
- Joined: Sat Nov 16, 2013 8:39 pm
- Currently Drives:: R. Megane 2 1.9dci sport package
Re: phase2 projecter headlights upgrade
Hi.
Were the connectors same on both headlights or you had to change them also ?
Thanks a loot in advance !!!
Were the connectors same on both headlights or you had to change them also ?
Thanks a loot in advance !!!
Renault Megane II 1.9dci sport p. 3dr. lowered on koni's,and exhausting through sebring
- DK-brun
- Learner Driver
- Posts: 65
- Joined: Fri Jul 22, 2011 8:24 am
- Currently Drives:: Renault Mégane II Tourer, Dynamique 2,0 16v
- Location: Denmark
Re: phase2 projecter headlights upgrade
Connecters should be the same unless you have OE xenon on your ph.1
I have done the upgrade aswell.
Looks good!
I have done the upgrade aswell.
Looks good!
Kasper Brun
Renault Mégane II Tourer, Dynamique 2,0 16v
Renault Mégane II Tourer, Dynamique 2,0 16v
- MilosB
- Advanced Driver
- Posts: 257
- Joined: Sat Nov 16, 2013 8:39 pm
- Currently Drives:: R. Megane 2 1.9dci sport package
Re: phase2 projecter headlights upgrade
Thanks a looot
no i dont have xenon on ph1
no i dont have xenon on ph1
Renault Megane II 1.9dci sport p. 3dr. lowered on koni's,and exhausting through sebring
Re: phase2 projecter headlights upgrade
The connecters was the same for the light except for the height adjustment the plug is different size.
i was going to try get the proper plugs and cut wires and crimp on but never bothered as i dont adjust them anyway.
i was going to try get the proper plugs and cut wires and crimp on but never bothered as i dont adjust them anyway.
Re: phase2 projecter headlights upgrade
were did you get your bumper
Re: phase2 projecter headlights upgrade
I got it a couple of years ago its a 225 bumper that i smoothed badge and wash holes off. Im breaking the car if your interested.
Who is online
Users browsing this forum: No registered users and 3 guests